Written by Craig B

Tile Roof Underlay Lifespan In Payson, AZ

The life of your underlay beneath your tile roof can have a significant impact on the comfort of your home. But it is important to realize how long underlay remains effective for. Read on to learn more.

Your Warranty

Although your beautiful tile roof may come with a lifetime warranty it does not mean the underlayment does. Yet it is the underlayment that is the most important feature in keeping your house dry. It is the workhorse of your roof in keeping your property dry while the tile acts as a sunscreen.

Felt Differences

Underlayment is a felt like material and is given a number according to its effectiveness. For example, many houses a dozen or so years or more in age have #30 felt as a roof underlay. But when it is exposed to the outside elements, the felt deteriorates more quickly, one of the leading causes of roof leak. To help counteract this many contractors now use #40 felt and is often covered up to twenty years by the manufacturer #30 underlayment is only made of organic materials and when it is exposed to debris, dirt and the outdoor climate. As a result it can becomes torn, brittle and dilapidated and that also leads to roof leaking.

Leak Causes

Roof underlayment often needs to be replaced every ten to fifteen years because leaks can occur due to some of the following reasons:

  • Lack of regular maintenance.
  • Undersized metal channels.
  • Not enough ridge and hip closure.
  • Underlayment not of a sufficient grade.
  • Tile exposure that is incorrect.
  • Installation that was incorrect.

Properly Done

When you get a contractor in to remedy this issue here are some of the things they may do:

  • The installation of new channel metal for the proper carriage of water.
  • Correct valley installation ensuring the correct flow of water.
  • Tiles that are secured properly with nails and in the right places on the roof.
  • Correct installation of plastic hip and ridge closure to make sure very little to zero dirt and water can get between the tile and the underlayment.

Metal Roof Repair & Installation in Payson by Right Way Roofing, Inc. 

Right Way Roofing, Inc. offers residential roof repair and commercial roof repair in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

How Long Do Tile Roofs Last
Written by webtechs

How Long Do Tile Roofs Last?

Tile roofing are quite common across the US, particularly in the southwest regions, such as Payson, Arizona. The word tile can in fact, mean anywhere from cement and/or concrete to terracotta tiles, or slate stone to fiber reinforced man-made types. Whereas installing tile roofing is one of the costly options, it’s advantages usually make the added cost worth it.

Advantages of Tile Roofing in Payson, AZ

Possibly the most invaluable advantage of tile roofing is how long they last. Commonly, a cared for and well-maintained tile roof could last up to 50 years, even though there are buildings in Europe of which tile roofs have lasted for 100’s of years. Tile roofs surpass all other types of roofing materials for its long life. It doesn’t matter whether the material is concrete cement, slate, terracotta, or fiber reinforced man-made provided that routine maintenance is in place, these roof types have extremely long-life expectancy.

Apart from its attractive appeal, tile roofs are totally resistant to fire— stone doesn’t ignite. They are also highly resistant to damage, meaning reduced maintenance costs.

Tile Roofing Upkeep in Payson, Arizona

Whereas tile roofs hold up well to a lot of the intense weather conditions the southwestern region has to offer, it still can be damaged. Intense weather, cold, wind, and hail, can make tiles crack or be blown off the roof entirely. The weather conditions, time, building motion and faulty installation can cause the roofs mortar to loosen.

In shady areas, mildew and lichen can develop on the tiles, and the tile could deteriorate if the mildew and lichen isn’t removed. Furthermore, the metal basins that fasten the tiles to your roof can become oxidized because of leaves or debris, or the using of a cement type mortar. A lot of these things are rare and isolated, but they can happen.

Whereas roofing tile can last for 10’s of years, the felt underlayment typically wears out faster (20 – 40 years), and needs to be replaced to preserve your roofing system. Last but foremost, foot traffic can easily crack tiles, and a professional roofing contractor is suggested if you need any kind of roofing repair.

Source:

  1. How Long Does A Tile Roof Last. (n.d.). Retrieved October 12, 2020, from https://www.roofingsouthwest.com/index.php?p=blog%2Fhow-long-does-a-tile-roof-last

Click here to read how long other types of roofing systems last.

Tile Roofing Done Right in Payson, Arizona By Right Way Roofing, Inc.

Right Way Roofing, Inc. has been the #1 provider people turn to in the Payson, Arizona area for over fifty years. A family-owned business, they can help you with your roofing needs for your home and business. As long-time members of the Arizona Roofing Contractors, you can have confidence we will build or replace a roof you can be proud of as we offer some of the greatest labor and material warranties in the roofing industry. Call today to schedule an appointment! East Valley: 480-232-5458 or West Valley: 502-299-8851.

At Right Way Roofing, Inc. we use an extremely strong underlayment to ensure your roof lasts longer than typical tile roofs. Most roofing companies use a cheap underlayment that will wear out in under 20 years. Our roofing underlayment will last much longer due to the high-quality underlayment. Get a free tile roofing installation quote in you live in the Phoenix Metropolitan Area. We also service Payson, Gilbert, Chandler, Glendale and more.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR THAT SERVES THE PAYSON, ARIZONA AREA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Best Roof Types For Payson, Arizona
Written by Brian B

Best Roof Types For Payson, Arizona (W/ Pictures)

While many homeowners believe tile roofing is the best roofing material type, it truly depends on where you live and your budget. Here’s a look at the best roof types for the Payson, Arizona area.

Roofing Types:

Metal Roofing

Metal Roofing Material Type - Types Of Roofing Materials

Metal roofing is becoming more of a popular option in the hot and dry climate of Payson. Homeowners rave about several characteristics of this roofing type. This material is energy efficient, saving you money on any utility bills. It is also extremely durable. With the ability to defend against any inclement weather, including monsoons, metal roofs can last a whole lifetime. This is a very strong material and one that will not require much maintenance at all.

Tile Roofing

Tile roofing has a timeless quality and look to it. It’s no wonder why this style remains popular throughout the great state of Arizona. Tiles are durable and very affordable for homeowners. Additionally, tiles can come in many different colors, sure to satisfy any needs. Tile roofing makes for great insulation. This style will keep your home cool during the summer and warm during the colder winter months.

Solar Roofing

Solar Roofing Material Type - Types Of Roofing Materials

Solar shingle roofing is one of the newer options in the roofing industry. Constructed with photovoltaic cells, these panels really do look like regular roofing. These shingles were first introduced back in 2005 to provide solar energy. Homeowners will certainly save a good portion of money off their electricity bills, but these installation costs for solar roofing can be hefty. Some installations can cost north of $20,000.

Shingle Roofing

Architects and contractors consistently recommend this type of roofing material. With various designs and patterns, the options are limitless for homeowners choosing shingle roofs. One of the only drawbacks to this material is it will not last forever. Eventually, this roofing will need to be replaced as wear and tear takes a toll over time. Arizona weather, specifically, can be troublesome for shingle roofs.

Foam Roofing

Foam Roofing Material Type - Types Of Roofing Materials

Foam roofing is very different from most other materials available on today’s market. The insulation is made of polyurethane foam, applied as a liquid and it creates a single sheath that covers the entire roofing area. This will eliminate the possibility of water build up altogether. Foam insulation is lightweight and consistently keeps the home cool.

Roof Repair In Payson, Arizona

Right Way Roofing, Inc. offers residential roof repair and commercial roof repair in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Metal Roof Installation Cost Payson
Written by webtechs

How Much Does Metal Roof Installation Cost In Payson, Arizona

Metal roof installation costs about $12,236 with average prices ranging from $10,375 to $14,075 in Payson, Arizona in 2020 according to Angieslist.com.

At the end of the day, having a metal roof installed can be less costly than an ordinary asphalt shingle roof. Metal roofs can last a lifetime, a lot have a modern look, and they save big money on your energy bills by keeping your house cooler during the scorching months.

Why are Metal Roofs More Expensive?

Here is Why a Metal Roof Will Cost More:

  • They typically last a lifetime, although a lot have warranties for a meager 50 years. Asphalt shingle roofing usually needs to be replaced every 25 years, so spending more money firsthand on a metal roof can save you over time.
  • They are pretty much maintenance-free. You will save on maintenance costs.
  • They are significantly durable. Metal roofs can weather intense environmental elements.

Think about choosing aluminum or steel roofing material rather than the more expensive metals: zinc and copper.

Warranty and Savings on Energy

Verify with the roofing contractor about a roofing warranty, as many companies can charge up to $3,000 additionally for one. Nonetheless, having a roofing guarantee is worth the money.

Installing a metal roof can help you save up to 40% on your cooling costs as opposed to asphalt shingles. Why is that? Metal roofing reflects sunlight, so your attic and general roof temperatures will be reduced. As a result, helping you save on cooling costs throughout hotter months.

Many homeowners even had their insurance rates reduced after getting a metal roof installed.

Find a Roofing Contractor in Payson

Make sure to ask about a lot of estimates from trained roofing contractors that have experience installing metal roofs. Roofing contractors frequently require a trade license, so be sure to ask roofing contractors about their city and/or state licenses if they are required in your region. They’ll also be required to pull any building permits.

Advantages of Metal Roofing in Payson

Metal roofs are a common roofing technique. It’s a little more costly than roof shingles. Metal roofs can last a lifetime and they demonstrate to be better at the end of the day. Metal roofs have a straightforward but elegant look. Metal roofs keep homes cool in the summer months saving on energy bills of upwards of 40% of the yearly energy costs. Utilizing metal as a roofing material is more costly but has its own advantages.

Metal roofing is a long-lasting roofing system therefore quality is essential. Spending more money on high-quality metal roofing is a once in a lifetime investment. It is vital to get it right the first go around.

Metal roofing doesn’t sustain maintenance fees. There aren’t any more financial obligations after the metal roof is installed. They are manufactured to endure all weather conditions regardless if it is warm or cold.

These qualities make metal roofing distinct therefore it can be used in in a lot of geographic locations.

What is the Labor Cost for Metal Roof Installation in Payson?

Metal roof installation costs are around $5.50 per sq. ft. and $12 per sq. ft., respectively. Metal roof shingles costs from $7 per sq. ft. to -$10 per sq. ft. installed. Its going to cost from $9 per sq. ft. to $12 per sq. ft. for a standing seam metal roof installation.

For instance, if you have 1,500 sq. ft roof, the average cost of metal roof installation is $8 per square foot – it will cost you $12,000 for the installation of the metal roofing. There are affordable shingles that can be installed on the old roofs top.

The roofing contractor doing the install is going to be important when it comes to its cost. It is a good idea to get a couple of estimates prior to choosing and hiring a roofing contractor.

Will Roof Design Change The Cost in Payson, AZ?

Your roofs architectural design can add to the metal roofing installation cost. If the design is complex, has too many domes, a lot of angles, or a skylight it will need higher skills from professional roofing contractors. This is going to increase the labor costs.

Metal roofing costs are a slightly higher because it is permanent on your roof option. It is beneficial for energy savings. It is cost effective to insure a home that has a metal roof. All in all it is a cost-saving roofing solution.

Metal Roof Installation Payson, Arizona

Right Way Roofing, Inc. offers residential roof installation and commercial roof installation in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Written by webtechs

Tile Roof Underlay Lifespan

The life of your underlay beneath your tile roof can have a significant impact on the comfort of your home. But it is important to realize how long underlay remains effective for. Read on to learn more.

Understand Your Warranty

Although your beautiful tile roof may come with a lifetime warranty it does not mean the underlayment does. Yet it is the underlayment that is the most important feature in keeping your house dry. It is the workhorse of your roof in keeping your property dry while the tile acts as a sunscreen.

Different Felts

Underlayment is a felt like material and is given a number according to its effectiveness. For example, many houses a dozen or so years or more in age have #30 felt as a roof underlay. But when it is exposed to the outside elements, the felt deteriorates more quickly, one of the leading causes of roof leak. To help counteract this many contractors now use #40 felt and is often covered up to twenty years by the manufacturer #30 underlayment is only made of organic materials and when it is exposed to debris, dirt and the outdoor climate. As a result it can becomes torn, brittle and dilapidated and that also leads to roof leaking.

Other Causes Of Leaks

Roof underlayment often needs to be replaced every ten to fifteen years because leaks can occur due to some of the following reasons:

  • Lack of regular maintenance.
  • Undersized metal channels.
  • Not enough ridge and hip closure.
  • Underlayment not of a sufficient grade.
  • Tile exposure that is incorrect.
  • Installation that was incorrect.

When The Job Is Done Properly

When you get a contractor in to remedy this issue here are some of the things they may do:

  • The installation of new channel metal for the proper carriage of water.
  • Correct valley installation ensuring the correct flow of water.
  • Tiles that are secured properly with nails and in the right places on the roof.
  • Correct installation of plastic hip and ridge closure to make sure very little to zero dirt and water can get between the tile and the underlayment.

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance, and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Written by webtechs

Metal Roof Insulation Tips

Metal roof insulation is a great way to help with energy conservation. read on to learn more about the ideal materials to use for metal roof insulation.

Foam Batting

Foam batting is the ideal metal roof insulation. It comes in panels rather than being paper covered fiberglass and can be used inside or on the outside. This spray insulation or over rolled up insulation is great because it lays flat and can be installed in a simple manner under the metal roofing.

Lay Insulation On Paper Liner

Paper wrap is important to the health of the home by not allowing water to build up in the space between the sheathing and the metal roof. As a place where mold can quickly grow, it is important to make sure that the paper liner is placed between the insulation and the sheathing.

Installation With Staples

The quickest, way to install metal roof insulation is with 1½ inch staples. You can easily go through several sheets of insulation and know that they are secure. Another benefit of using staples is that they do not make a large hole when penetrating into the sheathing. You will also be able to remove them much easier if there are any repairs that need to be made.

Cut Panels

Before doing any work with the metal roof insulation you should have it brought up onto the roof. This reduces the need to go up and down the ladder for tools, pieces of insulation, and making measurements. Make all cuts to the foam panels on the roof for more accurate cuts and quicker placement.

Gaps Between Panels

When there are gaps, or channels, between the pieces of insulation, you allow the air to flow between each one. The gaps do not have to be more than 1/8 inch, but they are important to the health of the roof, the insulation, and the house as a whole.

Purlins

One of the more popular methods of placing metal roofing on a home is to lay down purlins across the existing shingles. In this case, simply lay the insulation between the purlins. Make sure that the insulation you are using is the same thickness so that the metal roof will fit better.

Source: https://www.doityourself.com/stry/6-tips-for-installing-metal-roof-insulation

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance, and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Written by webtechs

Copper Roof Advantages And Disadvantages

Copper roofing continues to gain popularity. With its attractive blue-green patina it gains over time gives your home a unique appearance. Read on to learn more!

Added Curb Appeal

Copper is an attractive metal roofing material. If you want to increase your home’s resale value, a copper roof could be an ideal choice.

Durable

Copper roofs are strong, lasting in excess of fifty years with regular maintenance and repair. The metal is highly resistant to mildew, hire and hail.

Weight Issues

Copper is a lightweight material, which is a clear benefit when installed as your main roofing structure. Lightweight roofs do not put as much stress on your home’s internal structures as heavier materials such as steel, clay tiles, or wood shakes. This is especially important during heavy snowfalls.

Efficiency

Most metal roofs are highly energy efficient, as they reflect light instead of allowing heat into the home. Copper is no exception. Installing a copper roof helps you control heating and cooling costs.

Drawbacks

There are few drawbacks of copper roofing are as follows:  Noise can be an issue if the roof is installed over an open frame as metal does not buffer noise as well as softer materials, like asphalt or wood, so it’s imperative to use sound-absorbing materials underneath: plywood, solid sheathing or an existing shingle roof are standard practice. Copper is generally more expensive than shakes or shingles. Installation is quick and easy, but the material itself costs more to produce. Copper roofs tend to expand and contract frequently during weather changes. When this happens, the fasteners can become loose and require repair. The benefits of a metal roof definitely outweigh the added expense, but this is a personal decision every homeowner must make on their own.

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance, and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Written by webtechs

Glass Roofs

Glass roofs let in as much light as possible and glass technology makes it a very strong and long lasting material. But there are some limitations, and if you have the money all kinds of design options are available. Read on to learn more.

Wall Support

The more glass there is the heavier it becomes! Steel suppoorts are essential ither side and above an opening, such as an external door, or if the roof is particularly heavy. New extensions are constructed with a cavity wall to retain a certain amount of insulation and may hide a steel column. You will need to check if your large piece of glass can fit through your main entrance door or be carried through to your garden around the side of your house.

Budgeting

To keep costs down, choose a glazing system with “off the shelf” sizes and, if suitable, a uPVC or aluminium frame. Remember there may be restrictions in your area as to what the framing material may be.

Cleaning

Glass roofs need a minimum slope – the absolute minimum is 1% – so rainwater will help wash away any debris, dust and leaves that settle there. Usually, a slope of 5% or more guarantees a decent enough incline.

Glass Beams

This is when the glass roof is supported by glass beams. Adding these will probably be more expensive, but the end effect is stunning – the roof is all glazed! These beams are toughened and laminated, and your structural engineer will calculate the size and strength they need to be.

Window Treatments

Roof windows can help you enjoy the sun all year round. However, sometimes too much sun can make it hard to function – if you want to watch TV without the glare, wish to control the light and create a more romantic atmosphere, or want to keep some of the heat out, for instance. This is when blinds or shutters are very helpful.  There are specialist glazing systems available that can produce the right finish for your home’s needs – for instance, if you wish to retain as little of the sun’s heat as possible and avoid a ‘greenhouse’ effect. Anti-glare finishes are available in the form of opaque films you can apply to the glass.

Single Pane

If you would simply like to have a large piece of glass in the roof in order to brighten a dark room, and you don’t actually need it to open, then you might consider ordering a bespoke double-glazed unit. To achieve this look, you’ll need to talk with your builder and structural engineer about the size of roof light you’d like to install so they can judge its location.

Source: https://www.houzz.co.uk/magazine/9-things-you-need-to-know-about-glass-roofs-stsetivw-vs~66766759

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance, and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Written by webtechs

Metal Roof Leaks

Metal roofing continues its climb in popularity as a preferred choice of roofing materials. Nonetheless, they are not immune to leaking and otherwise being damaged. Read on to learn more of some of the more causes of metal roof leaks.

Metal Roofing Screws

Most leaks on metal roofs are somewhat remarkably caused by roofing screws. Designed to seal out water by the means of compressing a washer made from rubber at the base of the screw head. When driven into the metal roof panel, the washer forms a gasket separating the screw head from the roofing panel. This should be simple but when screws are not driven in correctly or are over driven or when the screws are inserted at an incorrect angle, all of these scenarios can lead to metal roof leaks.

Over driven screws are usually the result of attempting to ensure a tight seal but in doing so causes the rubber washer to break. Conversely, with under driven screws, the washer never gets compressed properly. When a screw is driven in at the incorrect angle, only part of the washer is sealed and when screws miss the metal strut or the wood framing underneath, the result is nothing is sealed at all.

Stack Flashings

Stack flashings are a feature of metal roofs that can become very prone to leaking. Stack flashings are considered the boot or, if you prefer, the flashings around the pipes and tubes coming out of the metal roof, including air vents, plumping pipes and HVAC vents. Usually, stack flashings are constructed from a rubber-type material that is positioned flat on the metal roof to form a seal. it also squeeze fits around the pipe, forming an additional seal. Because the metal roof contracts and expands, it means these seals are under continuous degrees of pressure. In addition, the sun degrades the rubber material of the flashings that usually only lasts 50 percent of the life expectancy of the metal roof itself.

Missing Sealants

Metal roof sealants usually do not last anything like as long as metal roofing panels so they need to be replaced as part of a regular roof maintenance program. Sealants under trims such as Z flashing and metal ridge caps around roof transitions, pitch pans, counter flashings, and reglets will all need to be updated because of normal wear and tear. Therefore, it is vital to use a metal roof sealant specifically made for metal roofing.

Seams And Overlaps

Seams are located where 2 pieces of metal roofing overlap causing a condition known as a capillary draw. Capillary Draw is when water can actually travel uphill between two tightly joined pieces of metal. Butyl tape or sealant positioned between the two pieces of metal can break the capillary draw but when not installed and utilized correctly can be the cause of actually making the leaks worse than if none had been used at all.

Curb Flashings

HVAC units on Metal Roofs are normally positioned on curbs. Installing metal roof panels is a fairly simple process but the flashing that tests the ability of any metal roofer. HVAC offers little room for error when fabricating the flashing. The uphill side of curbs and the two upper corners of the curb flashing are difficult areas, especially when you are dealing with large HVAC units. Water often gets trapped behind the unit, standing behind the flashing which eventually erodes sealants and begins to leak. The more you caulk, seal, or tar the uphill side the more water it will hold. This Catch 22 is difficult to remedy without having to start again from scratch.

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance, and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

Advantages and Disadvantages of Metal Roofs
Written by webtechs

Pros and Cons of Metal Roofs

Metal roofs are common all across Arizona and are popular around the Phoenix area for homes and businesses. It’s important you have professionals for metal roofing repairs and installation for your business or residential metal roof, as the roofs will also need regular maintenance over time. This post explains the advantages and disadvantages of metal roofs.

Whether you’re buying a home with one or thinking of installing, here’s what to know.

You may be putting a roof on a new home, or your existing roof needs a total makeover, there are many materials widely available. It doesn’t matter what roof style you have, metal roofs can be a great option because of their longevity, they are maintained easily, and energy-efficient. And you can choose from tin, zinc, aluminum, copper, or galvanized steel — just be sure your metal roofing material is tested and labeled by UL, FM Global, or similar, and that you get a hold of your local building department for any code requirements or permits you may need.

Advantages of Metal Roofs | Pros

Pro 1. Longevity

– Metal roofs usually last up to 40-70 years, depending on the material used. Traditional asphalt roofing material has an estimated life expectancy of about 12-20 years.

Pro 2. Durability

– Some metal roofs can endure wind gusts up to 140 miles per hour, will not crack or corrode, and can be impact-resistant (depending on which material you choose). Additionally, metal roofs don’t require the costly periodic maintenance that other roofing materials often need. However, they should be inspected regularly to make sure no repairs are needed.

Pro 3. Safety

– Metal roofs won’t spark and catch on fire during a wildfire or lightning strike.

Pro 4. Energy efficiency

– Metal roofs reflect radiant heat, which can reduce your cooling costs by 10%-25%.

Pro 5. Environmentally friendly

– Metal roofs are not only made up of 25%-95% recycled content, depending on the material used, but they are also 100% recyclable at the end of their lifespan as a roof. In comparison, most shingle tear-off waste ends up in landfills — up to 20 billion pounds a year.

Disadvantages of Metal Roofs | Cons

Despite their many advantages, metal roofs have some potential drawbacks.

Con 1. Affordability

– Metal roofs can cost as much as two to three times more expensive than other types of roofing materials. While the life expectancy of a metal roof is a lot longer, investing in a metal roof only makes sense if you plan to live in your home long enough to reap its cost benefits.

Con 2. Noisiness

– Metal roofs are known to be noisy, especially during a hailstorm or heavy rain. Adding additional insulation during its installation typically solves this problem, but usually increases the cost.

Con 3. Expansion and contraction

– Metal roofing materials that are attached as larger panels like to expand and contract. If they aren’t properly installed with fasteners that allow them to “breathe,” the panels can become loose and cause damage to them.

Con 4. Inconsistency of color match

– If a repair is needed or a room addition is added years later, it can be difficult to find an exact color match to the existing panels.

Con 5. Performance

– If water gathers anywhere on the roof because of insufficient installation or poor repairs, it can ultimately cause critical damage. Low-grade metals can also be less durable and thinner. Some metals rust in certain climates or dent a lot easier than others during hailstorms or even during installation.

Metal Roof Repair & Installation in Mesa by Right Way Roofing, Inc. 

If you’re a homeowner or property manager that has a metal roof; taking care of a metal roof is easier than maintaining other types of roofs. The Right Way Roofing, Inc. team provides metal roof installation, maintenance and repair. We handle roofing jobs of all sizes from simple repairs to completely installing a new metal roof. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley). Learn more about metal roof installation cost in Phoenix.

Categories

RIGHT WAY ROOFING IS A RESIDENTIAL AND COMMERCIAL ROOFING CONTRACTOR LOCATED IN PHOENIX ARIZONA

Call us TODAY! East Valley: 480-232-5458 or West Valley: 602-299-8851

1 2