How To Cut Metal Roofing - Payson, Arizona
Regular Post
Written by AZ R

How To Cut Metal Roofing – Payson, Arizona

Metal roofing is a terrific option for homeowners in Payson, Arizona. In order to install this roofing material, though, the metal sheets must be cut to fit onto your roof. Fortunately, cutting this material is quite easy when a few simple rules are followed.

Metal Roof Cutting Procedure

Cutting a metal roof sounds like an easy enough process, but homeowners must pay attention to details when beginning the procedure. The first thing to do is to lay the roofing sheets on a flat surface. Make sure the underside is facing upwards. Then pin the sheet in place with adjustable clamps.

Calculating the actual number of panels needed for your roof is crucial. Roof measurements, of course, are perhaps the first step in any process towards roofing repairs, replacements or installations. You will need to know how large the panels need to be and how to go about cutting them. Use a tape measurer to plan your potential panel cuts.

Lastly, prepare for any risks by putting on safety gear. Cutting metal can create a lot of dust in the air. Stay safe by putting on goggles, a mask and gloves. Go out and buy these supplies if you don’t already have them available in your home. If you’re looking to limit the dust and debris generated, then refrain from using a circular saw. This tool generally produces more debris than any other material used for cutting.

Tools For Cutting

There a few suggested tools to use when cutting metal roofing. With 29-guage metal roofing panels, a circular saw with a metal blade can be used to cut through this tough material. One issue with using this tool, though, is that it tends to cut too fast. Be careful with the speed at which you cut with the saw. Cutting too quickly can lead to paint damage on the panels. Paint damage will lead to unwanted rust in the years to come.

Metal shears are another popular tool used to perform this task. Again, cutting metal roofing with this tool is not always easy. Using metal shears can be a tedious and long process, but it offers the best and most efficient results. The last thing you want to find out is your cutting sizes are a bit off when you go to install this roofing type. Make constant short cuts with this tool. Taking the time to be efficient with this tool is very important.

If a starting point is desired, feel free to drill a small hole in the roofing material. An electric drill should work just fine. Then, use the shears to cut, using the pilot hole as a guide. If you are simply planning to cut end to end, then a pilot hole is not necessary. Hammering a nail or using a screwdriver to create a hole is effective, as well, but will take more time than an electric drill would for this process.

Cutting Steps

  • Mark the metal ahead of cutting.
  • Figure out how many panels your roof needs.
  • Put on protective gear before cutting begins.
  • Perform cutting process.

Metal Roofing In Payson, Arizona

Right Way Roofing, Inc. offers residential roof repair and commercial roof repair in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Metal Roofing
,
0
Pros And Cons Of Metal Roofing In Payson, Arizona
Regular Post
Written by AZ R

Pros And Cons Of Metal Roofing In Payson, Arizona

In the hot and dry climate of Arizona, metal roofing is a popular choice among homeowners. Metal roofs help conserve energy, along with many other benefits. Here’s a look at some pros and cons for this style for the Payson, Arizona area.

Pros and cons overview:

Pros

Cons

Metal Roofing Pros

Durability has to top the list of advantages when it comes to investing in metal roofing. Not only can these roofs last for a long time, they can withstand harsh weather, as well. Metal can certainly endure up to 140-mile-per-hour winds. You should have this roof checked regularly, but upkeep costs will stay low. Expect metal roofs to last up to 70 years. Typical asphalt roofing generally lasts only about 20 years.

Wildfires have become an unfortunate yet common occurrence across Arizona and California lately. The good news for homeowners, though, is that metal roofs will not catch on fire. These roofs can withstand lightning strikes as well, keeping the home and homeowner(s) safe and sound. This roofing type reflects radiant heat, lowering your cooling costs by at least 10%.

Metal Roofing Cons

The biggest disadvantage to choosing metal roofing has to be the cost associated with the material. Metal roofs can cost a lot more than other common roofing types on the market. With a longer lifespan, one can expect to pay a premium for metal roofing. Many homeowners do believe, though, that the cost is worth it in the long run.

If this roofing is not installed properly, the panels can expand or contract. Make sure a licensed professional performs the installation. Metal roofs are known to be noisy, especially when experiencing inclement weather in the area. Extra insulation can solve the issue, but it will come with additional charges.

Metal Roof Repair Payson, Arizona

Right Way Roofing, Inc. offers residential roof repair and commercial roof repair in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Metal Roofing
,
0
20 Common Roofing Problems In Payson AZ
Regular Post
Written by AZ R

5 Metal Roof Insulation Tips In Payson, AZ

Metal roofing is a fantastic way to conserve energy and cut down on noise pollution. That’s why many commercial buildings and homes are utilizing this roofing option lately. Here are 5 metal roof insulations tips in the Payson, AZ area.

  • Always use foam batting
  • Use staples
  • Panel gaps
  • Cut roof panels
  • Paper liner for insulation

Keep reading for full metal roof insulation tips.

Always Use Foam Batting

Foam batting is by far the best and most common material used for metal roof insulation. This form comes in panels, as opposed to paper covered fiberglass. Foam batting is convenient to use because it lays flat under the metal roofing and can be installed with ease. Additionally, this foam can be used on either the inside or outside of the sheathing.

Use Staples

Staples are surprisingly best suited to hold down metal roofing insulation. 1.5-inch staples is the recommended size to use for this task. Staples can penetrate several sheets of insulation while holding steady for long periods of time. Staples will not make large holes or dents in the insulation.

Panel Gaps

Metal roofs need to be able to breathe, as with most roofing materials. You want to allow airflow around the surface by leaving gaps between the panels. Gaps between panels are vital to the health and long-term existence of the roof.

Cut Roof Panels

So, how can a homeowner create these gaps between panels? The answer is actually quite simple. Measure out all materials before starting the process of insulation. Then, manually cut the foam panels. This will create the proper gapping and helps make the laying process much quicker and more efficient.

Paper Liner For Insulation

Forgetting or neglecting to lay down any type of paper wrap on the sheathing with the metal roofing is a common mistake for homeowners. Laying down paper wrap is a crucial step towards insulation. The paper is meant to protect the home by keeping water buildup from getting underneath the roofing.

Tile Roof Repair Payson, Arizona

Right Way Roofing, Inc. offers residential roof repair and commercial roof repair in Payson, Arizona and surrounding cities. If you need a new roof installed or replaced, Right Way Roofing, Inc., is the right way to go! Contact us or call us at 602-299-8851 for more information.

Metal Roofing
, ,
0